RGB LED Matrix Display Panel
Supports Raspberry Pi, ESP32, and Arduino...
This matrix panel is a bare screen and needs to be displayed with the main control board such as Raspberry Pi, ESP32, and Arduino. If it is used for multi-screen cascading, please make sure that the power of each screen is 5V/4A. It offers open source demos and tutorials for makers or electronics enthusiasts to get started, or DIY secondary development into other desktop or wall-mounted display applications.
Product Features
- On-board 64 x 64 full-color display LEDs
- 3mm pitch, displaying text, animation and colorful image
- Onboard two HUB75 interfaces, respectively for input and output. It can be cascaded multi-screen
- Providing open development resources and tutorials for the use of Raspberry Pi, Raspberry Pi Pico, Arduino Mega, ESP32 development boards
Specifications
| Dimensions | 192mm(Length) x 192mm(Width) x 15mm(Height) |
| Pixels | 64x64 |
| Pitch | 3mm |
| Pixel Form | 1R1G1B |
| Viewing Angle | ≥160° |
| Interface | HUB75 |
| Control Type | synchronization |
| Driving | 1/32 scan |
| Power Supply | DC 5V/4A |
| Power Port | VH4 socket |
High quality LED chips
Super Wide-Angle
The display features a viewing angle of over 160°, maintaining seamless image quality in all directions and distances, providing the same high-quality output for all viewers.
High Brightness & High Resolution
64 x 64 pixel 4096 RGB LEDs, HD full-color display
High Refresh Rate and High Contrast
The screen displays without ghosting or flickering, offering stable and smooth visuals with fast response speeds. The high contrast ensures clearer detail effects.
Two HUB75 interfaces, respectively for input and output. It can be cascaded multi-screen
| R1 | R higher bit data | G1 | G higher bit data |
| B1 | B higher bit data | GND | Ground |
| R2 | R lower bit data | G2 | G lower bit data |
| B2 | B lower bit data | E | E line selection |
| A | A line selection | B | B line selection |
| C | C line selection | D | D line selection |
| CLK | clock input | LAT | latch pin |
| OE | output enable | GND | Ground |
Providing open development resources and tutorials for the use of Raspberry Pi, Raspberry Pi Pico and Arduino Mega development boards
Strict Quality Control
Each LED display module undergoes a 72-hour test before shipment.
Product Dimensions
Application
DIY Maker, Desktop Signboard, Wall Mount Display, Stage, Shop, Hotel, Sports event, Advertising, Environment Monitor.
WIKI
Package Contents
- RGB-Matrix-P3.0-64x64 x 1
- VH3.96 Power Cable x 1
- 16P Color Ribbon Cable (30cm) x 1
- Gray Ribbon Cable x 1
- Power Conversion Connector x 1
- Magnetic Pins x 4
