PCIe To M.2 HAT
Designed for Raspberry Pi 5
This product is a dedicated M.2 adapter board for the Raspberry Pi 5, compatible with M.2 SSDs of sizes 2230/2242/2260/2280. It supports Gen2 and Gen3 modes and allows booting the Pi 5 from an SSD. The board features a streamlined design in the middle, which not only ensures structural integrity but also enhances airflow to reduce the SSD temperature. It has a transparent working status with onboard indicators: the PWR light is always on when powered, and the ACT light blinks during read/write operations.
Product Features
- Single-channel PCIe 2.0 interface
- Streamlined design that does not obstruct Raspberry Pi pins; only requires a soft ribbon cable for power
- Equipped with an external power supply interface to avoid concerns about insufficient power for starting the M.2 adapter board
- Supports devices using M.2 M Key edge connectors
- Supports SSDs with sizes 2230, 2242, 2260, and 2280
- Supports Gen2 and Gen3 modes
- Supports NVMe SSD booting
- Dedicated M.2 adapter board for Raspberry Pi 5
Product Parameters
| Model | PCIe To M.2 HAT B |
| Supported Modes | Gen2、Gen3 |
| Supported Protocol | NVME |
| Supported Hard Drive Models | 2230、2242、2260、2280 |
| PCIe Interface Standard | PCIe Gen 2.0 x1 |
| Hard Drive Connector | M.2 M KEY |
| External 5V Power Supply Port | 2P Female Connector |
| Dimensions | 88.00mm (L) x 56.46mm (W) |
Dedicated M.2 adapter board for the Raspberry Pi 5
Equipped with an external power supply interface to avoid concerns about insufficient power for starting the M.2 adapter board
Supports devices using M.2 M Key edge connectors
Compatible with M.2 SSDs of sizes 2230/2242/2260/2280. It supports Gen2 and Gen3 modes and allows booting the Pi 5 from an SSD.
The board features a streamlined design in the middle, which not only ensures structural integrity but also enhances airflow to reduce the SSD temperature.
It has a transparent working status with onboard indicators: the PWR light is always on when powered, and the ACT light blinks during read/write operations.
Interface Definition
① M Key Slot
② 2-pin External 5V Female Connector
③ PCIe 16-pin Flip-top FPC Connector
④ SSD 2230 Model Mounting Hole
⑤ SSD 2242 Model Mounting Hole
⑥ SSD 2260 Model Mounting Hole
⑦ SSD 2280 Model Mounting Hole
⑧ Working Status Indicator
⑨ Mounting Post Hole
Dimensions
Wiki
PCIe to M.2 HAT B Adapter Board for the Raspberry Pi 5
Package Contents
1. PCIe To M.2 HAT B x12. M2.5*18+6 Nylon Standoffs x4
3. M2.5 Nylon Screws x4
4. M2.5 Nylon Nuts x4
5. M3*2.5 Surface Mount Nut x1
6. M3*2.5 Screws x2
7. 2-pin Connector Cable x1
8. 16P Flexible Flat Cable x1
