This product is composed of the human presence sensing module LD2410 and the relay, which can be powered by 100~240V AC power supply and used in combination with the human presence sensing module to control the relay. MCU 5V power supply can also be used, and GPIO level is used to control the relay. This product can be used in household appliances, industrial equipment, intelligent environment and other occasions.
Product Features
- Supply voltage: DC5V / AC100～240V
- Relay allows access to the load:250V/5A
- Optocoupler isolation circuit, strong anti-interference ability, stable work
- Equipped with a relay working indicator for easy relay status observation
Power consumption
When SG-RELAY-S2410 is powered at 5V, the power consumption is roughly 0.03W when the relay is not operational, and 0.425W when the relay is operational. If an AC voltage input is used, the power consumption is about 0.037W when the relay is not operational, and approximately 0.5W when the relay is operational.
Specifications
| Size | 57mm(Length) x 39mm(width) |
| Weight | 42g |
| Optocoupler | LTV-357T-B-IN |
| Supply voltage | DC 5V / AC 100-240V |
| Relay Load Capacity | 250V/5A |
Resource Profile
① HLK-PM01: compact AC to DC Power Module
② AC Input Terminal: Accepts AC 100-240V input; top for neutral (N), bottom for live (L)
③ Relay Output Terminals
④ Relay
⑤ Jumper Cap: Used to switch relay control mode between MCU or human motion sensor module
⑥ 2.54mm 5Pin Human Motion Sensor Module Header
⑦ PH2.0mm 5Pin MCU Header
Module relay wiring diagram
WIKI
Package Contents
- SG-RELAY-S2410 x1
- PH2.0mm 5PIN x1
