This TFT LCD display is equipped with an onboard joystick, six buttons, with a resolution of 240x240, an internal ST7789 controller, designed based on the Raspberry Pi 40-pin GPIO header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B. It utilizes SPI interface communication and provides demo codes in C and Python for Raspberry Pi, capable of drawing points, lines, rectangles, circles, and images.
Product Features
- 240 x 240 resolution
- SPI interface, less pin occupation
- The ST7789 controller is built into the screen
- Onboard one joystick(Five direction) and six buttons
- Provides open source demo codes that can be used with the Raspberry Pi development board
Product Parameters
| Resolution | 240 x 240 |
| Display Colors | RGB，65K colors |
| Control chip | ST7789 |
| Screen type | TFT |
| Backlight | LED |
| Communication Interfaces | 4 Line SPI |
| Supply Voltage | 3.3V |
| Operating Temp | -20℃～+70℃ |
| Storage Temp | -30℃～+80℃ |
| Dimensions | 65mm(L) x 30mm(W) |
| LCD display area | 23.4mm (W) x 23.4mm (H) |
Interface definition
| VCC | VDD(3.3V) |
| GND | GND |
| SDA | SPI data input |
| SCK | SPI clock input |
| CS | SPI chip selection, active at low level |
| BL | backlight control |
| D/C | Display data/command selection pin in 4-line serial interface. |
| RESET | Display screen reset, active at low level |
| K1 | User button K1 |
| K2 | User button K2 |
| K3 | User button K3 |
| K4 | User button K4 |
| SW1 | User button L |
| SW2 | User button R |
| S1 | User joystick |
Resoure Profile
① User joystick
② 1.3 inch LCD screen
③ User buttons
④ User buttons
⑤ Raspberry Pi 40pin GPIO Female Header
WIKI:
Package Contents
- 1.3 inch LCD Display Module x1
- Accessory pack
2 